I am running an Emerson DeltaV 12.3.1 system that is running on legacy Hirschmann switches. I would like to migrate over to using Emerson SMART switches; specifically the VE6049 rackmount switches. Can you still log on and use the Command Line Interface (CLI) to troubleshoot issues, view log files, and make configuration changes?
Due to budget constraints, I will only be able to convert one switch at a time with long periods between each conversion. Has anyone done something similar and have you encountered any issues doing this?
Hi
I am working dcs Deltav up grading
how upgrade dcs DeltaV ver 6 to DeltaV ver 11 ( Pictures , Dynamos , ..)
Please help me
On 7/12/17, Alexandre Peixoto
wrote:
> Update from Emerson Exchange 365 [http://www.emersonexchange365.com/]
>
> Alexandre Peixoto
> [http://www.emersonexchange365.com/members/alexandre-peixoto]
> Chris,
> It is a recommended path to consider DeltaV Smart Switches for your DeltaV
> Area Control Network especially if you are planning to or you are already
> using Electronic Marshaling. The DeltaV Smart Switches have a pre-configured
> setup to enable storm control, loop prevention and yet can be managed from
> the Smart Switch Command Center (in v12.3.1) or the Network Device Command
> Center (introduced in v13.3). The DeltaV Smart Switches provide access
> through its serial port (CLI access) for troubleshooting and log files
> access, and configuration changes are limited to what the available wizards
> allow you to change - not all options are permitted or exposed through the
> CLI nor Telnet as the DeltaV Smart Switches are designed with the DeltaV
> communications in mind - they come pre-configured to work with DeltaV
> systems out-of-the-box.
> The recommended installation guidelines require the DeltaV Smart Switches to
> be installed with spaces between themselves to prevent overheating, the
> specific details are provided in the switches safety manuals.
> Beyond that, the switch port lockdown is a feature that is easily accessible
> via the command centers, and with firmware v8.0.13 users can also configure
> port mirroring for security monitoring. This solution is aligned with the
> Security Information and Event Management (SIEM) and the Network Security
> Monitor solutions for DeltaV systems. Please check out additional details
> related to the latest software available for DeltaV Smart Switches on the
> Guardian Support Portal (Knowledge Base Articles).
> For additional information please check our DeltaV Security & Networks
> webpage: www.emerson.com/.../deltav-dcs-security-and-networks
> [http://www.emerson.com/en-us/automation/control-and-safety-systems/distributed-control-systems-dcs/deltav-distributed-control-system/deltav-dcs-security-and-networks]
> I hope this helps!
> Regards,
> View online
> [http://www.emersonexchange365.com/operateandmanage/deltav/f/50/p/6496/14699#14699]
> You received this notification because you subscribed to the forum. To
> unsubscribe from only this thread, go here
> [http://www.emersonexchange365.com/operateandmanage/deltav/f/50/t/6496/mute].
> Flag
> [http://www.emersonexchange365.com/operateandmanage/deltav/f/50/p/6496/14699?AbuseContentId=f89d23ab-fcf0-4d8d-9082-664ac72e2ddc&AbuseContentTypeId=f586769b-0822-468a-b7f3-a94d480ed9b0&AbuseFlag=true] this
> post as spam/abuse.