Emerson Exchange 365

In reply to Dominic Sabio:

Marty,

from your description the issue is based on speed and fiber type mismatch. On all your attempts each switch was using transceivers not compatible with each other. Below is a summary of the components you listed earlier on:

1) VE6049M03 is a module applicable to VE6048 DeltaV Smart Switches with eight 100Mbps single-mode fiber ports (not long-haul)
2) Cisco GLC-LH-SMD is a SFP transceiver module that handles 1Gbps single-mode fiber (long-haul)
3) VE6050T06 is a DeltaV Smart Switch SFP transceiver module that handles 100Mbps single-mode standard (not long-haul)
4) Cisco GLC-GE-100FX is a SFP transceiver module that handles 100Mbps multi-mode fiber

I can't find a way to make any combination using 1, 2, 3, 4 above that would allow you to establish proper communications between the Cisco switch and the DeltaV Smart Switch using the fiber you have. You need to define what type of fiber you want to use and then select either SFP transceiver modules or media modules that would suit your needs.

Please refer to the DeltaV Smart Switches product datasheet for supported media modules and SFP transceiver modules ordering information.
Please refer to www.Cisco.com for additional information about Cisco supported SFP transceiver modules.

I hope this helps!

Regards,

Alexandre Peixoto

You'll need this SFP in the Cisco GLC-FE-100LX = "100BASE-LX10 SFP module for 100-Mb ports, 1310-nm wavelength, 10 km over SMF"