hello i need a flow transmitter can any body help me on this matter thank you

hello i need a flow transmitter  can any body help

20 Replies

  • Hi Amir, 

    What industry and what protocol (HART, FIELDBUS, or MODBUS)?


    Regards, 
    Karim

    Sent from my iPhone

    On Sep 23, 2012, at 9:11 AM, "amir" <bounce-amir@community.emerson.com> wrote:

    hello i need a flow transmitter  can any body help

  • Dear Amir,

    Kindly le me know what type flow meter you are using or to be using ? which allow us to offer you right solution!

    Thanks and Best Regards

    Major

    Major Chu

  • Dear karim 
    Thankyou for your reply 
    we are using these for waste water industry and field bus
    thankyou
    Click to show quoted text
    On Sep 24, 2012, at 12:40 AM, Karim Abdulkhalik wrote:

    Hi Amir, 

    What industry and what protocol (HART, FIELDBUS, or MODBUS)?


    Regards, 
    Karim

    Sent from my iPhone

    On Sep 23, 2012, at 9:11 AM, "amir" <bounce-amir@community.emerson.com> wrote:

    hello i need a flow transmitter  can any body help

  • Dear Major 
    thankyou for your reply 
    please note that these transmitters will be connected to a PLC 
    thankyou
    Click to show quoted text
    On Sep 24, 2012, at 5:12 AM, Major Chu wrote:

    Dear Amir,

    Kindly le me know what type flow meter you are using or to be using ? which allow us to offer you right solution!

    Thanks and Best Regards

    Major

  • In reply to amir:

    Dear Amir,

    PLease me know your contact information - location /email/ mobile #, I lilke to ask our local sales support to contact .

    Thanks and Best Regards

    Mjaor

    Major Chu

  • Anonymous
    Anonymous

    In reply to Major Chu:

    Dear  amir,

    Can you give us your process data so that we can be able to help you in sizing/selecting the appropriate flow meter ?

    flow rate , pressure ...., pipeline size .... etc

  • Thankyou  for your attention
    Please find attached data sheet
    thankyou
     
    From: Abdelaal [mailto:bounce-Abdelaal@community.emerson.com]
    Sent: Wednesday, September 26, 2012 12:05 AM
    To: Flow@community.emerson.com
    Subject: RE: [EE365 Flow Track] hello i need a flow transmitter can any body help me on this matter thank you
     

    Dear  amir,

    Can you give us your process data so that we can be able to help you in sizing/selecting the appropriate flow meter ?

    flow rate , pressure ...., pipeline size .... etc

  • Dear Major
    Thankyou for your attention
    Please find attached the data sheet
    thankyou
     
    From: Major Chu [mailto:bounce-Major_Chu@community.emerson.com]
    Sent: Monday, September 24, 2012 7:07 AM
    To: Flow@community.emerson.com
    Subject: RE: [EE365 Flow Track] hello i need a flow transmitter can any body help me on this matter thank you
     

    Dear Amir,

    PLease me know your contact information - location /email/ mobile #, I lilke to ask our local sales support to contact .

    Thanks and Best Regards

    Mjaor

  • Dear Karim
    Please find attached data sheet
    Also we will connect to PLC
     
    thankyou
     
    From: Karim Abdulkhalik [mailto:bounce-Karim_Abdulkhalik@community.emerson.com]
    Sent: Monday, September 24, 2012 12:41 AM
    To: Flow@community.emerson.com
    Subject: Re: [EE365 Flow Track] hello i need a flow transmitter can any body help me on this matter thank you
     
    Hi Amir, 
     
    What industry and what protocol (HART, FIELDBUS, or MODBUS)?
     
     
    Regards, 
    Karim

    Sent from my iPhone

    On Sep 23, 2012, at 9:11 AM, "amir" <bounce-amir@community.emerson.com> wrote:

    hello i need a flow transmitter  can any body help

  • In reply to amir:

    Amir,

    Per your specifiction sheet, the flow meter type was specified by VA (Variable Area) Flow meter with 4-20mA HART output to PLC, I am not sure if you mind or not to use other flow meter such as Mag or Vortex, as we don't have VA meter like you specified. otherwise, you may find that from VA meter supplier.

    Thanks and Best Regards

    Major Chu

  • Dear Major
    Thankyou very much for this information
    Let me check  and I will get back to you very soon
    Thankyou
    Amir
    By the way do you have any information on oxymitter prob
     
    From: Major Chu [mailto:bounce-Major_Chu@community.emerson.com]
    Sent: Saturday, September 29, 2012 4:24 AM
    To: Flow@community.emerson.com
    Subject: RE: [EE365 Flow Track] hello i need a flow transmitter can any body help me on this matter thank you
     

    Amir,

    Per your specifiction sheet, the flow meter type was specified by VA (Variable Area) Flow meter with 4-20mA HART output to PLC, I am not sure if you mind or not to use other flow meter such as Mag or Vortex, as we don't have VA meter like you specified. otherwise, you may find that from VA meter supplier.

    Thanks and Best Regards

  • Amir,
     
    Sorry for the delay in getting back with you, I was out of town. Let me know where you are located so I can connect you with the right people.
     
    We do have a pressure transmitter that meets your needs. Let me know.
     
    Regards,
    Karim
     
     
     
    Karim Abdulkhalik | Senior Marketing Engineer | Pressure Marketing
    Emerson Process Management | Rosemount Measurement Division
    8200 Market Blvd. | Chanhassen | MN | 55317
    T +1 952 949 7435  | F +1 952 949 7123
     
    Click to show quoted text
    From: amir [mailto:bounce-amir@community.emerson.com]
    Sent: Friday, September 28, 2012 11:32 PM
    To: Flow@community.emerson.com
    Subject: RE: [EE365 Flow Track] hello i need a flow transmitter can any body help me on this matter thank you
     
    Dear Major
    Thankyou very much for this information
    Let me check  and I will get back to you very soon
    Thankyou
    Amir
    By the way do you have any information on oxymitter prob
     
    From: Major Chu [mailto:bounce-Major_Chu@community.emerson.com]
    Sent: Saturday, September 29, 2012 4:24 AM
    To: Flow@community.emerson.com
    Subject: RE: [EE365 Flow Track] hello i need a flow transmitter can any body help me on this matter thank you
     

    Amir,

    Per your specifiction sheet, the flow meter type was specified by VA (Variable Area) Flow meter with 4-20mA HART output to PLC, I am not sure if you mind or not to use other flow meter such as Mag or Vortex, as we don't have VA meter like you specified. otherwise, you may find that from VA meter supplier.

    Thanks and Best Regards

  • Dear Karim
    Thankyou for your email
    There was a mistake on my part which I apologize
    What I needed was a variable area flow meter not transmitter
    Do you have any information on that subject
    Thankyou
    Amir
     
    From: Karim Abdulkhalik [mailto:bounce-Karim_Abdulkhalik@community.emerson.com]
    Sent: Monday, October 01, 2012 3:48 PM
    To: Flow@community.emerson.com
    Subject: RE: [EE365 Flow Track] hello i need a flow transmitter can anybody help me on this matter thank you
     
    Amir,
     
    Sorry for the delay in getting back with you, I was out of town. Let me know where you are located so I can connect you with the right people.
     
    We do have a pressure transmitter that meets your needs. Let me know.
     
    Regards,
    Karim
     
     
     
    Karim Abdulkhalik | Senior Marketing Engineer | Pressure Marketing
    Emerson Process Management | Rosemount Measurement Division
    8200 Market Blvd. | Chanhassen | MN | 55317
    T +1 952 949 7435  | F +1 952 949 7123
    karim.abdulkhalik@Emerson.com
     
    From: amir [mailto:bounce-amir@community.emerson.com]
    Sent: Friday, September 28, 2012 11:32 PM
    To: Flow@community.emerson.com
    Subject: RE: [EE365 Flow Track] hello i need a flow transmitter can any body help me on this matter thank you
     
    Dear Major
    Thankyou very much for this information
    Let me check  and I will get back to you very soon
    Thankyou
    Amir
    By the way do you have any information on oxymitter prob
     
    From: Major Chu [mailto:bounce-Major_Chu@community.emerson.com]
    Sent: Saturday, September 29, 2012 4:24 AM
    To: Flow@community.emerson.com
    Subject: RE: [EE365 Flow Track] hello i need a flow transmitter can any body help me on this matter thank you
     

    Amir,

    Per your specifiction sheet, the flow meter type was specified by VA (Variable Area) Flow meter with 4-20mA HART output to PLC, I am not sure if you mind or not to use other flow meter such as Mag or Vortex, as we don't have VA meter like you specified. otherwise, you may find that from VA meter supplier.

    Thanks and Best Regards

  • Amir,
     
    I’m not aware of any variable area flow meters that we make.
     
    Hopefully Major Chu was able to help you.
     
    Good Luck,
    Karim
     
    Karim Abdulkhalik | Senior Marketing Engineer | Pressure Marketing
    Emerson Process Management | Rosemount Measurement Division
    8200 Market Blvd. | Chanhassen | MN | 55317
    T +1 952 949 7435  | F +1 952 949 7123
     
    Click to show quoted text
    From: amir [mailto:bounce-amir@community.emerson.com]
    Sent: Tuesday, October 02, 2012 12:53 AM
    To: Flow@community.emerson.com
    Subject: RE: [EE365 Flow Track] hello i need a flow transmitter can anybody help me on this matter thank you
     
    Dear Karim
    Thankyou for your email
    There was a mistake on my part which I apologize
    What I needed was a variable area flow meter not transmitter
    Do you have any information on that subject
    Thankyou
    Amir
     
    From: Karim Abdulkhalik [mailto:bounce-Karim_Abdulkhalik@community.emerson.com]
    Sent: Monday, October 01, 2012 3:48 PM
    To: Flow@community.emerson.com
    Subject: RE: [EE365 Flow Track] hello i need a flow transmitter can anybody help me on this matter thank you
     
    Amir,
     
    Sorry for the delay in getting back with you, I was out of town. Let me know where you are located so I can connect you with the right people.
     
    We do have a pressure transmitter that meets your needs. Let me know.
     
    Regards,
    Karim
     
     
     
    Karim Abdulkhalik | Senior Marketing Engineer | Pressure Marketing
    Emerson Process Management | Rosemount Measurement Division
    8200 Market Blvd. | Chanhassen | MN | 55317
    T +1 952 949 7435  | F +1 952 949 7123
     
    From: amir [mailto:bounce-amir@community.emerson.com]
    Sent: Friday, September 28, 2012 11:32 PM
    To: Flow@community.emerson.com
    Subject: RE: [EE365 Flow Track] hello i need a flow transmitter can any body help me on this matter thank you
     
    Dear Major
    Thankyou very much for this information
    Let me check  and I will get back to you very soon
    Thankyou
    Amir
    By the way do you have any information on oxymitter prob
     
    From: Major Chu [mailto:bounce-Major_Chu@community.emerson.com]
    Sent: Saturday, September 29, 2012 4:24 AM
    To: Flow@community.emerson.com
    Subject: RE: [EE365 Flow Track] hello i need a flow transmitter can any body help me on this matter thank you
     

    Amir,

    Per your specifiction sheet, the flow meter type was specified by VA (Variable Area) Flow meter with 4-20mA HART output to PLC, I am not sure if you mind or not to use other flow meter such as Mag or Vortex, as we don't have VA meter like you specified. otherwise, you may find that from VA meter supplier.

    Thanks and Best Regards

  • Yes but major said that Emerson does not have that kind of flow meter 

    Sent from my iPhone

    On Oct 2, 2012, at 4:38 PM, "Karim Abdulkhalik" <bounce-Karim_Abdulkhalik@community.emerson.com> wrote:

    Amir,
     
    I’m not aware of any variable area flow meters that we make.
     
    Hopefully Major Chu was able to help you.
     
    Good Luck,
    Karim
     
    Karim Abdulkhalik | Senior Marketing Engineer | Pressure Marketing
    Emerson Process Management | Rosemount Measurement Division
    8200 Market Blvd. | Chanhassen | MN | 55317
    T +1 952 949 7435  | F +1 952 949 7123
     
    Click to show quoted text
    From: amir [mailto:bounce-amir@community.emerson.com]
    Sent: Tuesday, October 02, 2012 12:53 AM
    To: Flow@community.emerson.com
    Subject: RE: [EE365 Flow Track] hello i need a flow transmitter can anybody help me on this matter thank you
     
    Dear Karim
    Thankyou for your email
    There was a mistake on my part which I apologize
    What I needed was a variable area flow meter not transmitter
    Do you have any information on that subject
    Thankyou
    Amir
     
    From: Karim Abdulkhalik [mailto:bounce-Karim_Abdulkhalik@community.emerson.com]
    Sent: Monday, October 01, 2012 3:48 PM
    To: Flow@community.emerson.com
    Subject: RE: [EE365 Flow Track] hello i need a flow transmitter can anybody help me on this matter thank you
     
    Amir,
     
    Sorry for the delay in getting back with you, I was out of town. Let me know where you are located so I can connect you with the right people.
     
    We do have a pressure transmitter that meets your needs. Let me know.
     
    Regards,
    Karim
     
     
     
    Karim Abdulkhalik | Senior Marketing Engineer | Pressure Marketing
    Emerson Process Management | Rosemount Measurement Division
    8200 Market Blvd. | Chanhassen | MN | 55317
    T +1 952 949 7435  | F +1 952 949 7123
     
    From: amir [mailto:bounce-amir@community.emerson.com]
    Sent: Friday, September 28, 2012 11:32 PM
    To: Flow@community.emerson.com
    Subject: RE: [EE365 Flow Track] hello i need a flow transmitter can any body help me on this matter thank you
     
    Dear Major
    Thankyou very much for this information
    Let me check  and I will get back to you very soon
    Thankyou
    Amir
    By the way do you have any information on oxymitter prob
     
    From: Major Chu [mailto:bounce-Major_Chu@community.emerson.com]
    Sent: Saturday, September 29, 2012 4:24 AM
    To: Flow@community.emerson.com
    Subject: RE: [EE365 Flow Track] hello i need a flow transmitter can any body help me on this matter thank you
     

    Amir,

    Per your specifiction sheet, the flow meter type was specified by VA (Variable Area) Flow meter with 4-20mA HART output to PLC, I am not sure if you mind or not to use other flow meter such as Mag or Vortex, as we don't have VA meter like you specified. otherwise, you may find that from VA meter supplier.

    Thanks and Best Regards