Emerson Exchange 365

• Not Answered

SIMOCODE DP - DeltaV

Hi,

I am having problems with some old simocodes and DeltaV. The one that is working below is a newer version (E10) with a different gsd file. The ones that are not working is using the same gsd file used in the old dcs system (foxboro i/a). All nodes have the same device state (offline) and Master Adedress (255). Have anyone had the same issuses as I have and can guide me to a solution?

Best Regards

Sven Bengtsson

• Simocode

Sven Bengtsson

• 1 Sep 2017 4:27 PM
• Cancel

2 Replies

• MCrisler

  

  • 1 Sep 2017 5:23 PM

  The configuration fault box is checked, so it's likely something isn't set up quite right in your parameterization in DV Explorer. I haven't used your particular device before, but check the manual for info on configuring the device using the GSD. There may be a something specific you have to do that isn't readily apparent from the physical device setup (i.e. gateway parameters must be in a specific profibus slot).

  • Cancel
• Sven Bengtsson

  

  • 1 Sep 2017 6:42 PM

  In reply to MCrisler:

  Hi,
  
  Solved it just 5 mins ago. I have edited the gsd file (removed slots that where not used) and imported it to DeltaV again, so now it works.

  • Cancel