Verifying measurements for compliance with regulatory agencies has been time-consuming for many manufacturers and producers. I came across a presentation by Emerson’s Kevin Douglas on using remote monitoring software to verify the measurements required to comply with emissions monitoring regulations.
Kevin opened his presentation by describing Continuous Emissions Monitoring Systems (CEMS). This equipment monitors NOx, SOx, CO2, and other emissions, usually from flue gas such as a steam methane reformer, boiler, heater, etc. The CEMS package includes the analyzer, sample probe, sample handling system, calibration gas, conditioning equipment, and data acquisition system (DAS) for reports.
Here in the U.S., state permits require a CEMS for emissions reporting, and some states/counties also require emissions reports for Volatile Organic Compounds (VOCs). Federal regulations governing CEMS reporting include 40 CFR Part 60 and 40 CFR Part 75.
In situ continuous emissions monitoring system (CEMS) method
The most common method of emissions monitoring is extractive. The Extractive method pulls a sample from the stack and sends the sample to the analyzer. Typical measurements from this method include NOx and COx.
The in situ CEMS method analyzes stack components directly in the stack via laser or IR/UV. Typical measurements include those from extractive measurements plus many more. CEMS reporting for emissions monitoring can be performed per federal reporting guidelines when coupled with a DAS. Some of these reporting requirements include:
Traditionally, metrology systems maintenance requires a lot of tracking and effort in collecting stranded data from assets, identifying issues before failure, and making multiple trips to return to operation.
The Plantweb Advisor for Metrology provides a modular analytics platform to understand better the health and risks of measurement devices and systems. It enables remote monitoring, measurement device verification and management, predictive maintenance analytics, and health assessment dashboards to ensure emissions are being collected accurately and reliably.
For one offshore oil & gas producer, the software platform enabled metering teams to monitor the equipment from onshore and alert suppliers when issues arise, saving multiple trips to the offshore platforms. This producer estimated USD 4 million in operational savings by switching from the traditional way to remote monitoring.
Emissions is an important subject which will be covered extensively at the October 24-28 Emerson Exchange conference in Grapevine, Texas (DFW area). A search of the conference session catalog shows the following sessions:
Register by August 31 to save $500 on the conference registration fee.
The post Continuous Emissions Remote Monitoring appeared first on the Emerson Automation Experts blog.