It’s wise to protect the sensitive electronic equipment in our homes from surges and noise with electrical power quality equipment. The same is true for the critical data and network devices found in manufacturing facilities.
In an Electrical Products & Solutions article, Protecting Equipment Against Poor Power Quality and Disturbances, Emerson’s Mark Dziedzic shares solutions to:
…power quality disturbances that cost American manufacturers $26 billion annually in damaged machinery, work stoppage, lost data, and energy costs.
Mark notes that importance in prioritizing power quality considerations.
Threats to load sensitive equipment come from inside and outside the facility. These can range from impulses, voltage sags, swells and noise, to interruptions due to utility brownouts and total blackouts.
He explains that 20% of power quality issues occur outside the facility such as lightning strikes, but 80% occur within the facility.
In an average factory, power problems primarily involve surges (62%) and sags (29%), with the balance being impulses, harmonics and the loss of AC line voltage altogether. Culprits may be electrical noise from a variable frequency drive, or a high inrush current from a motor or spot welder, or an electric arc furnace drawing several times its full load current when starting. Add to that other factors that can threaten power, improper grounding, improper routing, or even an undersized distribution panel.
Click to enlarge
Power supplies at the point of use that are properly sized:
…ensure the right voltages are getting to your equipment or controls, regardless of voltage sags.
Surge control devices limit:
…high-voltage spikes to a level that is acceptable to most electronic equipment. Choose components that are placed in parallel with the line and serve as a clamping mechanism for high-energy impulses. Tracking filters are an ideal solution for microprocessor-based products to provide clean AC power at the equipment level avoiding damaging degradation or “electronic rust” over time. Finally, data/signal line products can be used to protect your point of use equipment from high-energy impulses protecting controls and critical data you need for your operation.
Read the article for more on power distribution solutions for power quality including transformers properly suited for the application, supplier service and support to help with selection and lifecycle support, and the importance of power quality in manufacturing performance.
Visit the SolaHD Power Quality section on Emerson.com and download the SolaHD Power Quality GuideBook for more on ways to improve the power quality at your facility.
The post Improving Electrical Power Quality appeared first on the Emerson Automation Experts blog.
This is the official online community site of the Emerson Global Users Exchange, a forum for the free exchange of non-proprietary information among the global user community of all Emerson Automation Solution's products and services. Our goal is to improve the efficiency and use of automation systems and solutions employed at members’ facilities by sharing our knowledge, experiences, and application information.
User Groups |
World Areas |
Community Guidelines |
Legal Information |
Contact Community Manager
Website translation provided by
© 2015-2022 Emerson Global Users Exchange. All rights reserved.