Emerson Exchange 365

Activity

Closing the Loop Driving Reliability, Safety and Energy Improvements

Jim Cahill

Emerson’s Brian Joe and Ben Skal presented on Plantweb technologies and how they help facilitate digital transformation initiatives. Brian opened noting that process control is all based on the See-Decide-Act closed-loop model. Typically it is an open-loop process for managing reliability, safety and energy efficiency. By closing the loop improvements can be made in these areas to improve operational performance. One…
- 25 Sep 2019
Ovation Advanced Condition Monitoring

Jim Cahill

Jason King Emerson’s Jason King shares an update on advanced condition monitoring in the Ovation distributed control system at last week’s 2019 Ovation Users’ Group conference. This integrated machinery protection and condition monitoring module built directly into the Ovation system. It is capable of typical equipment protection functions, but also has condition monitoring technology built in, so no separate software…
- 6 Aug 2019
Ovation Advanced Condition Monitoring

Jim Cahill

Jason King Emerson’s Jason King shares an update on advanced condition monitoring in the Ovation distributed control system at last week’s 2019 Ovation Users’ Group conference. This integrated machinery protection and condition monitoring module built directly into the Ovation system. It is capable of typical equipment protection functions, but also has condition monitoring technology built in, so no separate software…
- 6 Aug 2019
Ovation Advanced Condition Monitoring

Jim Cahill

Jason King Emerson’s Jason King shares an update on advanced condition monitoring in the Ovation distributed control system at last week’s 2019 Ovation Users’ Group conference. This integrated machinery protection and condition monitoring module built directly into the Ovation system. It is capable of typical equipment protection functions, but also has condition monitoring technology built in, so no separate software…
- 6 Aug 2019
Cooling Tower Solutions

Jim Cahill

At the 2019 Ovation Users’ Group conference, Emerson Jason King provided an update on Ovation DCS solutions for cooling towers. Jason opened explaining that $450,000 USD can be saved using automated cooling tower monitoring and optimization solutions. Several challenges exist for cooling towers in the power generation industry. Cooling towers are used to condense the steam exiting the steam turbine. This helps complete…
- 30 Jul 2019
Cooling Tower Solutions

Jim Cahill

At the 2019 Ovation Users’ Group conference, Emerson Jason King provided an update on Ovation DCS solutions for cooling towers. Jason opened explaining that $450,000 USD can be saved using automated cooling tower monitoring and optimization solutions. Several challenges exist for cooling towers in the power generation industry. Cooling towers are used to condense the steam exiting the steam turbine. This helps complete…
- 30 Jul 2019
Cooling Tower Solutions

Jim Cahill

At the 2019 Ovation Users’ Group conference, Emerson Jason King provided an update on Ovation DCS solutions for cooling towers. Jason opened explaining that $450,000 USD can be saved using automated cooling tower monitoring and optimization solutions. Several challenges exist for cooling towers in the power generation industry. Cooling towers are used to condense the steam exiting the steam turbine. This helps complete…
- 30 Jul 2019
IIoT-Based Condition Monitoring

Jim Cahill

Shane Hale Justifying projects to improve reliable operations can be difficult. Projects driving increased revenue are often prioritized over those that reduce costs. In a Chemical Processing article, Build An Effective Condition-Monitoring Program , Emerson’s Shane Hale shares his thoughts on the economics of increased reliability, where to look for improvements, specifics on how to apply Industrial Internet of Things…
- 25 Jul 2019
IIoT-Based Condition Monitoring

Jim Cahill

Shane Hale Justifying projects to improve reliable operations can be difficult. Projects driving increased revenue are often prioritized over those that reduce costs. In a Chemical Processing article, Build An Effective Condition-Monitoring Program , Emerson’s Shane Hale shares his thoughts on the economics of increased reliability, where to look for improvements, specifics on how to apply Industrial Internet of Things…
- 25 Jul 2019
IIoT-Based Condition Monitoring

Jim Cahill

Shane Hale Justifying projects to improve reliable operations can be difficult. Projects driving increased revenue are often prioritized over those that reduce costs. In a Chemical Processing article, Build An Effective Condition-Monitoring Program , Emerson’s Shane Hale shares his thoughts on the economics of increased reliability, where to look for improvements, specifics on how to apply Industrial Internet of Things…
- 25 Jul 2019
Avoiding Low Voltage Electrical Asset Outages

Jim Cahill

Early in my career as a freshly-minted electrical engineer in the mid-1980s, I worked on projects on offshore oil & gas production platforms in the Gulf of Mexico. These platforms required turbine or reciprocating engine gas generators with diesel engine backup for when gas was not available from the production stream. Low voltage (LV) distribution systems, typically at 480VAC were used to power the pumps, compressors…
- 15 Jul 2019
Avoiding Low Voltage Electrical Asset Outages

Jim Cahill

Early in my career as a freshly-minted electrical engineer in the mid-1980s, I worked on projects on offshore oil & gas production platforms in the Gulf of Mexico. These platforms required turbine or reciprocating engine gas generators with diesel engine backup for when gas was not available from the production stream. Low voltage (LV) distribution systems, typically at 480VAC were used to power the pumps, compressors…
- 15 Jul 2019
Avoiding Low Voltage Electrical Asset Outages

Jim Cahill

Early in my career as a freshly-minted electrical engineer in the mid-1980s, I worked on projects on offshore oil & gas production platforms in the Gulf of Mexico. These platforms required turbine or reciprocating engine gas generators with diesel engine backup for when gas was not available from the production stream. Low voltage (LV) distribution systems, typically at 480VAC were used to power the pumps, compressors…
- 15 Jul 2019
Diagnosing Gearbox Defects

Jim Cahill

Robert Skeirik In earlier posts , Emerson’s Robert Skeirik highlighted how PeakVue impact detection analytics technology can provide early warning of bearing failure in time to plan and schedule maintenance before unplanned downtime occurs. These analytics help drive overall reliability improvement key performance indicators (KPIs). I came across a recently published whitepaper, Confirming Gearbox Defect Using Waveform…
- 11 Jul 2019
Diagnosing Gearbox Defects

Jim Cahill

Robert Skeirik In earlier posts , Emerson’s Robert Skeirik highlighted how PeakVue impact detection analytics technology can provide early warning of bearing failure in time to plan and schedule maintenance before unplanned downtime occurs. These analytics help drive overall reliability improvement key performance indicators (KPIs). I came across a recently published whitepaper, Confirming Gearbox Defect Using Waveform…
- 11 Jul 2019
Diagnosing Gearbox Defects

Jim Cahill

Robert Skeirik In earlier posts , Emerson’s Robert Skeirik highlighted how PeakVue impact detection analytics technology can provide early warning of bearing failure in time to plan and schedule maintenance before unplanned downtime occurs. These analytics help drive overall reliability improvement key performance indicators (KPIs). I came across a recently published whitepaper, Confirming Gearbox Defect Using Waveform…
- 11 Jul 2019
Transforming Reliability Work Practices

Jim Cahill

Every day, our lives continue to be digitally transformed in how we communicate and engage with each other. It’s not just the technologies in smart phones, smart watches and applications; it’s how we use these technologies to change the way we accomplish things. The same is true for manufacturers and producers in their digital transformation initiatives. Technologies play a key role, but it’s the changes toward more…
- 22 May 2019
Transforming Reliability Work Practices

Jim Cahill

Every day, our lives continue to be digitally transformed in how we communicate and engage with each other. It’s not just the technologies in smart phones, smart watches and applications; it’s how we use these technologies to change the way we accomplish things. The same is true for manufacturers and producers in their digital transformation initiatives. Technologies play a key role, but it’s the changes toward more…
- 22 May 2019
Transforming Reliability Work Practices

Jim Cahill

Every day, our lives continue to be digitally transformed in how we communicate and engage with each other. It’s not just the technologies in smart phones, smart watches and applications; it’s how we use these technologies to change the way we accomplish things. The same is true for manufacturers and producers in their digital transformation initiatives. Technologies play a key role, but it’s the changes toward more…
- 22 May 2019
IIoT for Equipment Condition Monitoring.

Jim Cahill

Even back when I was a young engineer in the 1980s, we had condition monitoring solutions for our large turbine generators and compressors on the offshore oil & gas production platforms in the Gulf of Mexico. Mike Boudreaux Condition monitoring technology has advanced greatly since then. Now, Industrial Internet of Things (IIoT)-based sensors can feed much of the data to enable more assets – not just rotating equipment…
- 25 Mar 2019
IIoT for Equipment Condition Monitoring.

Jim Cahill

Even back when I was a young engineer in the 1980s, we had condition monitoring solutions for our large turbine generators and compressors on the offshore oil & gas production platforms in the Gulf of Mexico. Mike Boudreaux Condition monitoring technology has advanced greatly since then. Now, Industrial Internet of Things (IIoT)-based sensors can feed much of the data to enable more assets – not just rotating equipment…
- 25 Mar 2019
IIoT for Equipment Condition Monitoring.

Jim Cahill

Even back when I was a young engineer in the 1980s, we had condition monitoring solutions for our large turbine generators and compressors on the offshore oil & gas production platforms in the Gulf of Mexico. Mike Boudreaux Condition monitoring technology has advanced greatly since then. Now, Industrial Internet of Things (IIoT)-based sensors can feed much of the data to enable more assets – not just rotating equipment…
- 25 Mar 2019
Actionable Information with Plantweb Insight

Jim Cahill

Let’s end the week with a quick 1:48 YouTube video about Plantweb Insight to better analyze and use the data for safe, reliable and compliant operations. Plantweb Insight is enabled by wireless sensors and networks and gives users the knowledge to make effective and timely decisions The suite of Plantweb Insight applications provide instant access and visibility into plant assets in an intuitive way without the…
- 7 Dec 2018
Actionable Information with Plantweb Insight

Jim Cahill

Let’s end the week with a quick 1:48 YouTube video about Plantweb Insight to better analyze and use the data for safe, reliable and compliant operations. Plantweb Insight is enabled by wireless sensors and networks and gives users the knowledge to make effective and timely decisions The suite of Plantweb Insight applications provide instant access and visibility into plant assets in an intuitive way without the…
- 7 Dec 2018
Actionable Information with Plantweb Insight

Jim Cahill

Let’s end the week with a quick 1:48 YouTube video about Plantweb Insight to better analyze and use the data for safe, reliable and compliant operations. Plantweb Insight is enabled by wireless sensors and networks and gives users the knowledge to make effective and timely decisions The suite of Plantweb Insight applications provide instant access and visibility into plant assets in an intuitive way without the…
- 7 Dec 2018