Fwd: Telnet session with DeltaV Controller

From: krishna sen <[email protected]>

Date: Sun, May 10, 2020 at 12:19 PM
Subject: Telnet session with DeltaV Controller
To: <[email protected]>

Dear all

Please let me know how can i open a telnet link with MQ controller and look in the Hardware event log ?

krishna sen

• 10 May 2020 7:08 AM
• Cancel

6 Replies

• Hassan.hameed

  

  • 10 May 2020 9:06 AM

  You can go through diagnostic and select the required controller and right click select telnet after that follow list appear

  • Cancel
• krishna sen

  

  • 10 May 2020 9:40 AM

  Many many thanks for reply. Can I open telnet link with controller through command prompt ? If yes then what is the linking procedure. 

  
  

  • Cancel
• Hassan.hameed

  

  • 10 May 2020 9:53 AM

  In reply to krishna sen:

  No you cannot only from deltav explorer diagnostic can access to the telnet

  • Cancel
• krishna sen

  

  • 10 May 2020 10:21 AM

  Thx

  
  

  • Cancel
• Lun.Raznik

  

  • 11 May 2020 3:41 PM

  In reply to krishna sen:

  telnet IP should work. For example, if IP of the controller is 10.4.0.10, then telnet 10.4.0.10 will open session to the controller.

  • Cancel
• Jason.Brumfield

  

  • 16 May 2020 3:44 PM

  as an adder, if you have redundant controllers, you have to drill down to the standby in diagnostics to remote the non active controller, each one has it's own telnet logs.

  • Cancel