Recent Measurement Instrumentation Discussions
Similar Posts
Micromotion meter factor correction and FCF Calibration
floboss S600 +
Floboss 407
Forcing/simulating flow on FloBoss 600+
FLOBOSS 600+ and PROPLUS COMMUNICATION ISSUES
Share

Calibrating and Correcting Errors on a Floboss 503

Sir,

i have Flowboss 503 installed for natural gas measurements. while calibrating it using roclink software, there are 3 columns displayed:

1. dead weight/tester value
2. live reading
3. Error

Now my query is- Suppose i am calibrating for Temperature and apply a certain value such as "0" degree C using resistance box for zero calibration and entered the same value in dead weight/tester value columns. but live reading is showing 10 degree C after being stabilized and error field also shown accordingly.

how will i correct the error? can simply clicking on "set zero" will eliminate the error?

rahulnitj108
  • Nick Norenberg
    Hello,

    What you are seeing is expected. It appears that you have not fully finished the calibration, so the live reading is reflective of the default curve set; hence the discrepancy between what you want to set and the live reading. If the unit is not at default, the readings shown are being calculated using the current calibration curve in place. Once you finish the calibration process (set zero, set span, and set mid-points (up to three mid-points, and are optional)) you will be able to go into a verification, or new calibration, and see the new calibration curve applied. Once the new calibration curve is applied the live reading values will read as expected.

    If you are ever in need of further assistance with the FloBoss 503, or any other Remote Automation Solution products - please feel free to use SupportNet to raise concerns with our Technical Support Staff. SupportNet is free of charge for our Basic Account. Please use the following link below to sign up today! Remote Automation Solutions Technical Support can also be reached toll free at 1-800-537-9313. We are available during all World Area standard working hours.

    http://www2.emersonprocess.com/en-US/brands/remote/systems_and_software/supportnet/Pages/supportnet_registration.aspx

    Best regards,

    Nick Norenberg
    RAS Technical Support, Global Lead
  • rahulnitj108

    In reply to Nick Norenberg:

    Thank you sir for clearing my doubt...

This is the official online community site of the Emerson Global Users Exchange, a forum for the free exchange of non-proprietary information among the global user community of all Emerson Automation Solution's products and services. Our goal is to improve the efficiency and use of automation systems and solutions employed at members’ facilities by sharing our knowledge, experiences, and application information.

User Groups | World Areas | Community Guidelines | Legal Information | Privacy Policy | Contact Community Manager

Website translation provided by Website Translator

© 2015-2022 Emerson Global Users Exchange. All rights reserved.