Emerson Exchange 365

Redundant cards Issue in M Serie

Dear Friend

As i checked in Deltav 13.3 at M Series Controller ,all redundant cards (Analogue input  / output , Digital input / output) are described 8 channel. and it seems  there is not any way to have redundant cards in M series Controller with more than 8 channes , but in product-data- DeltaV  M-series Traditional I/O (2018) which is about M series card some cards can be found redundant with more than 8 channel such as

AI Plus, 16-Channel, 4-20  mA HART

AO Plus, 16-Channel, 4-20  mA HART

DI Plus, 32-Channel, 24V DC  dry contact

DO Plus, 32-Channel, 24V DC High-Side

please guide me to know about this discrepancy

Amir

• 23 Oct 2019 7:56 PM
• Cancel

4 Replies

• Rune Reppenhagen

  

  • 24 Oct 2019 3:15 PM

  The Plus cards you list above are supported on DeltaV v13.3.1 and newer.
  
  In v13.3 there are support for the following high density Series 2 cards: AI 16 ch, DI 32 ch, and DO 32 ch.
  
  Regards,
  Rune

  • Cancel
• Amir

  

  • 24 Oct 2019 3:59 PM

  In reply to Rune Reppenhagen:

  Thanks a lot sir , According to your answer there are two different version of Deltav13 (Deltav 13.3 and Deltav 13.3.1).
  I have another question. can be loaded license of Deltav 13.3 in Deltav 13.3.1 or Deltav 13.3.1 has a Different article number for its license

  • Cancel
• Rune Reppenhagen

  

  • 24 Oct 2019 5:21 PM

  In reply to Amir :

  The initial DeltaV release is usually x.3 and then after about a year the final x.3.1 releases. There shouldn't be any differences in licensing...

  • Cancel
• Amir

  

  • 25 Oct 2019 4:58 AM

  In reply to Rune Reppenhagen:

  thanks for your answer

  • Cancel