RE: How to Install Micro Motion Transmitters Video

lancefoss — Sat, 10 Feb 2018 18:06:13 GMT

Well-engineered equipment. Thank you.

RE: How-To Video on Coriolis and Magmeter Smart Meter Verification

lancefoss — Sat, 10 Feb 2018 17:36:56 GMT

Appears the video "7-minute YouTube video, Micro Motion How to Run and Schedule the Basic Version of Smart Meter Verification" is no longer available on YouTube.

RE: Flowmeter Calibration Questions and Answers

Vicken — Tue, 01 Sep 2015 17:20:48 GMT

We have just aquired an F200 and F300 micromotion coriolis flow meters with integrated 1700 transmitters from an auction in Europe.

We have installed the F200 vertically upwards on a 2" stainless steel pipe and are testing on fruit juice batch measurement application. The ingredients of each batch are carefully weighed and then the mixture sent through the flow meter to a holding tank. Out of the 5 batches prepared and sent, None of the mass readings on the F200/1700 matches with the actual batch weight. The readings of the 5 batches varied by 4.04%, 1.3%, 4.84%, -2.99% and 7.77% respectively. What could be the problem. I have to mention that the pump supplying the juice to the flow meter is of piston type and hence some pulsating vibration is felt on the piping and eventually on the F200 itself. Is this the culprit? What is the solution?

I appreciate if you could assist me in finding the appropriate solution. Thanks , Vicken.

Flow Blog - All Comments

RE: How to Install Micro Motion Transmitters Video

RE: How-To Video on Coriolis and Magmeter Smart Meter Verification

RE: Flowmeter Calibration Questions and Answers